When correctly hung, the correct material will make an inside really feel full — not solely do they supply privateness and regulate daylight, however they create the phantasm of a bigger area and add a dose of texture. Discovering the correct measurement curtains and hanging your curtain rod on the applicable top is essential for each aesthetics and performance. “If the peak of drapes isn’t maximized, it may make a room look shorter than it truly is — creating a sense of compression in a room,” says Ashley Macuga, principal designer of Collected Interiors.

We perceive there’s quite a bit that goes into hanging curtains, from measuring your window to putting in curtain rod brackets into drywall. That’s why we’ve written this easy-to-follow information, damaged up into two components: Learn how to measure for curtains and the way to cling curtains. We tapped into designer Ashley Macuga for her skilled recommendation, so you may cling curtains similar to a professional.

What You’ll Want

Learn how to Measure for Curtains

✔️ Calculate the width of your window. Your curtain rod ought to prolong previous the window on each side by no less than 8 to 10 inches. To create the looks of a bigger window, your rod ought to be a complete of 16 to twenty inches longer than your window.

✔️ Take into account the scale of your material stack, which refers back to the quantity of area the curtains take up when they’re absolutely opened and pushed to the edges, says Macuga. “Personally, I wish to have a curtain stack on either side that’s no less than half the scale of the window for a extra elegant and full look when the curtains are drawn.”

✔️ Calculate the peak of your window. To make a room really feel taller and extra grand, cling your curtain rod a couple of inches (about 4 to six) above your window. “The commonest mistake is hanging curtains too low,” says Macuga.

✔️ Measure from the highest of your window body to the ground. This measurement will decide how lengthy your curtains ought to be — and don’t neglect so as to add a couple of inches, since your curtain rod will likely be hung above the window. Curtains ought to nearly attain the ground. “We intention for 1/4″ if there are not any pets within the residence, and 1/2″ if there’s a danger that pet hair would possibly accumulate and cling to the underside,” says Macuga.

Designer recommendation: When doubtful, measurement up. In case you’re anxious about puddling on the bottom, hem the curtains or carry them to your native seamstress.

Learn how to Grasp Curtains

When you’ve bought the correct measurement curtain rod and material, it’s time to interrupt out the drill. Whereas some folks could favor to rent a handyman or a TaskRabbit, it’s easy sufficient to do it your self. Observe these step-by-step directions to hold curtains with ease.

1. Use a pencil to mark drill holes to your bracket. When you’ve decided how excessive and large to hold the curtain rod bracket, mark the wall with a pencil. Use a stage to make sure your markings on either side are even.
2. Screw within the brackets for the curtain rod. Material is heavy, which suggests you’ll most likely want wall anchors until you’re in a position to find studs on the wall. (Tip: Use a stud finder to find out in the event you’ll want wall anchors.) First, drill information holes then fasten the brackets to the wall utilizing a drill or screwdriver.
3. Grasp the curtains. After you thread the curtains onto the rod, cling the rod within the brackets. Use a stage to make sure the curtains are hung evenly. Then, open and shut the curtains to make sure they’re working correctly.